[sadermo]

Cyclone Box Reloaded
Some More Basic Information :
- USB Bus powered only, 5V @ 500mA (2.5W)
- USB 1.0, 1.1, 2.0 and 3.0 Compatible
- Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms - drivers signed for 64bit) - this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
ones
- Lightweight construction
- Smartcard Connector
- Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
- Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
- Built-in VPP generator for old NOR based phones
- USB signalling led (USB transaction signalling)
- VBAT singalling led (power-up status of Flashbus port)
- Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
- Operates 100% standalone (after initial registration)

--------------------------------

New CycloneBox Installer v1.20 (03.05.2012)

Things which introduced in new Version

- New Faster and reliable Hw introduced (Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


Improvements

- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62


Bug Fixes

- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes

Important Notes

1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 update credits from now
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at: http://www.karwos.hk/CycloneBoxInstaller.exe
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.



CycloneBox Classic and Reloaded Official Website
CYCLONE BOX - RELOADED


Cyclone Team Official Facebook page
www.facebook.com/cyclonebox


Best Regards
CycloneBox Team

[sadermo]

WHAT ???????
YOU STILL DONT HAVE CYCLONEBOX RELOADED !!!
GET IT NOW JUST IN 59 USD ONLY

Some More Mind Bl0wing Updates on the way , So Stay tune as always


BR
Cyclone Team

How to Enter Unlock Codes on all LG Models



Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:




Method #1 Insert a non accepted simcard, and enter code when prompted for a code

OR

Method #2 Go to the dial screen and press “2945#*model number#”

for example if its a p999 you enter “2945#*999#” or if its a p990 you enter “2945#*990#” etc…

OR

Method #3 to the dial screen and press 2945#*71001# as if making a call, enter code when prompted

OR

Method #4 Go to the dial screen and press *#865625# as if making a call, enter code when prompted

---------- Alternative Code Input Instructions ----------


Follow these step carefully, as long as you have the correct code it will work 100%1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.3. Type the Unlock code (Network or NCK code) and hit Unlock button.4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# (CAUTION! This will reformat all your data!)on phone keypad. Now wait until the phone is restarted. This operation will erase all data in your phone!5. Now type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button. It will say "unsuccessful" again, don't worry!6. Type the Unlock code (Network or NCK code) and hit Unlock button.7. Your phone now give you the message "Network Lock Successful"Now your phone is successfully unlocked!How to Unlock LG (most models):

1. Insert not-allowed SIM card 
2. Power on the handset- phone will display "phone restricted" 
3. Select "Cancel" - phone will display "phone restriction code" 
4. Enter the SIM unlock code 
5. Select "OK" - the handset is now successfully unlocked

How to Unlock LG Phoenix p505


1. As if making a call press *#865625#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG E720 (Optimus chic)
1. Insert the NOT ALLOWED sim card. 
2. On the keypad, type: " 2945#*720# "
3. The screen will then ask to enter the network code, enter the given NCK code.
4. Press unlock
5. And the cell phone is unlocked.

How to Unlock LG myTouch Q c800


1. As if making a call press 2945#*800#
2. Click "Network"
3. Click "unlock network"
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG Doubleplay


1. As if making a call press 2945#*279#
2. Click "Network"
3. Click "unlock network"
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG e900h

1. Enter a non accepted simcard
2. Phone will ask from "sim pin"
3. Enter unlock code provided
4.  press OK
5.  the handset is now successfully unlocked

How to Unlock LG Pop GD510


1. As if making a call press 2945#*510#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5.  the handset is now successfully unlocked

How to Unlock LG GD570 


1. Turn on phone with original SIM card or no simcard
2. Enter the following sequence *#865625#
3. Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked.  Press OK to continue.
4. The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given.
5. After entering the code a second time, the phone will be unlocked.
6. Press OK to exit and the pone will reboot by itself.
 

How to Unlock LG Loop GT540


1. As if making a call press 2945#*540#
2. Click "unlock usim"
3. Click "unlock network"
4. Enter code, press OK
5.  the handset is now successfully unlocked




How to Unlock LG CF360 
1. Turn on phone with original SIM card or no simcard
2. Enter the following sequence *#865625#
3. Screen says you have entered unlock function, and cautions that after 10 failed attempts the phone will be permanently locked.  Press OK to continue.
4. The phone will ask you to input the unlock code twice, do it. Be careful and type the code exactly as given.
5. After entering the code a second time, the phone will be unlocked.
6. Press OK to exit and the pone will reboot by itself.


Unlock Instruction for LG p509 Optimus T


1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type 2945#*509#
3. The phone will ask you to input the unlock code twice, just input the NCK code
4. Device is now unlocked

 

Unlock Instruction for LG p500h Optimus T

1. Power ON your phone with not allowed sim card (one that didn’t come with the phone)
2. Type 2945#*500#

3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

 

Unlock Instruction for LG Quantum

1. Turn on your phone with a non accepted SIM card
2. Phone will display “Phone Restricted”.
3. Select “Cancel” and the LG phone will display “phone restriction code”.
4. Now, enter your LG unlock code.
5. Select OK and your mobile should be unlocked!




Unlock Instruction for LG GT505

1. Power ON your phone with no simcard
2. Type *2945#505#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

 

Unlock Instruction for LG KP500 Cookie or KP501 Cookie 

1. Power ON your phone with no simcard
2. Type 2945#*71001#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked




Unlock Instruction for LG TU720 (SHINE) and VU

1. Power ON your phone with not allowed sim card (one that didn't come with the phone)
2. Type *#865625#
3. the phone will ask you to input the unlock code twice, just input the unlock code
4. Device is now unlocked

 

How to Unlock LG gw620 unlock

1. Insert original sim card and turn phone on.
2. Enter 2945#*620#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete

 

How to Unlock LG GS170 

1. Turn on phone without SIM card
2. Enter 2945#*71001#
3. Choose unlock, press OK
4. Enter unlock code and press OK and phone is unlocked!




How to Unlock LG KG800 or TG800 Chocolate:

1. With the phone in standby, enter 2945#*7101#. This will activate the extra menu.
2. Go to: Settings > Security > SimLock > Network
3. Select deactivate. Enter the unlock code


Fido LG GW300 Gossip


1. Power on your LG GW300 with the original SIM card in.
2. Enter 2945#*300#
3. A menu will pop up, select SIM Unlock.
4. Enter your unlock code and hit OK.
5. Your LG GW300 may automatically reboot and should now be unlocked!

 

or

1.power phone ON without SIM
2.type 2945#*71001# to enter unlock menu
3. enter unlock code or codes

 

OR

1. Insert not-allowed SIM card 
2. Power on the handset- phone will display "phone restricted" 
3. Select "Cancel" - phone will display "phone restriction code" 
4. Enter the SIM unlock code 
5. Select "OK" - the handset is now successfully unlocked




LG GR500 Xenon

1. Insert not-allowed SIM card
2. Power on the handset- phone will display "phone restricted"
3. Select "Cancel" - phone will display "phone restriction code"
4. Enter the SIM unlock code
5. Select "OK" - the handset is now successfully unlocked

OR

1. insert original sim card and turn phone on.
2. Enter 2945#*9701#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.

OR

1. After turning on your mobile phone, press: *#865625#
2. Press Yes to continue.
3. Enter the 16 digit Subsidy Unlock Code
4. Enter the 16 digit Subsidy Unlock Code, again.
5. Device should say: “Network Lock Deactivated”
6. Phone may automatically reboot

 

How to Unlock LG GS290 Cookie

with an original simcard

type 2945#*290# and insert NCK code


LG GS505 Sentio Unlocking Instructions

1. Turn on your LG GS505 Sentio with original SIM card
2. Enter 2945#*505#
3. A menu will pop up, select SIM unlock
4. Enter your unlock code and press OK
5. The phone will then reboot and your LG GS505 Sentio is unlocked!

 

 

How to Unlock LG GT350 Town

1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*350#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!

 

How to Unlock LG C710h

1. Power on your phone with the original SIM card or no simcard
2. Enter 2945#*710#
3. A menu will pop up, select SIM Unlock, DO NOT select NETWORK unlock.
4. Enter your unlock code and hit OK.
5. Your phone will reboot and is unlocked!

 

How to Unlock LG C2000:


1. Insert non-Cingular SIM card 
2. Power on the handset - phone will display "phone restricted" 
3. Select "Cancel" - phone will display "phone restriction code"  
4. Enter the SIM Unlock code  
5. Select "OK" - the handset is now successfully unlocked




How to Enter Unlock Codes on LG F2250:


1. With allowed sim card in the start menu type: 2945#*3311#.
2. Handset shows saved, then return to startup screen
3. Press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK'
4. Enter your unlock code and OK.




How to Enter Unlock Codes on LG U8150: 

1. Switch ON your phone with a not allowed SIM card. 
2. Compose: 277634#*#. 
3. Go to menu "SIM Lock". 
4. Enter the unlock code


How to Enter Unlock Codes on LG U8110:



1. With a not allowed sim card in your phone enter Pin code then validate, type: 277634#*# 
2. Select 'Sim Unlock' menu # 
3. Enter NCK code then validate 
4. Your phone is now unlocked.


How to Enter Unlock Codes on LG U8210:



1.With a not allowed sim card enter Pin code then validate, type: 277634#*# 
2.Shows test menu 
3.Choose sim test menu and type: 2945#*#, choose Sim Unlock menu 
4.Handset shows 'Enter NCK' 
5.Enter code, then hit OK.

How to Enter Unlock Codes on LG U81xx:



1.To bring up the unlock menu on the phone with a SIM card, type 2945#*88110# 
2.Enter the code
In case you need to reset the phone without a SIM card first, type 277634#*# or 47328545454#.



How to Enter Unlock Codes on Cingular AT&T LG CU500:

 

1.Insert non-Cingular SIM card. 
2.Power on the handset. Phone will display "Invalid SmartChip" 
3.(IF THE PHONE DOES NOT DISPLAY INVALID SMARTCHIP, PLEASE POWER OFF AND ON AGAIN) 
4.In Idle screen, enter 159753#*#. Phone will display "Enter NCK, Remaining 5 
5.Enter the 8 digit SIM unlock code 
6.Select "OK". The handset is now successfully unlocked.
  Unlock Instructions for LG KU990 (Viewty):

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.


Unlock Instructions for LG KF600:

1. insert original sim card and turn phone on.
2. Enter 2945#*71001#
3. A menu will pop up to enter the sim unlock code
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete.


Unlock Instructions for LG KF750 aka LG SECRET:

1. Insert original sim card and turn phone on.
2. Enter 2945#*750#
3. A menu will pop up, select sim unlock
4. Enter your unlock code and press ok
5. The phone will then reboot and the unlock is complete


Unlock Instructions for LG CU915:

1. Power ON your phone with an accepted SIM card.
2. Type *#865625#CODE
3. Press OK
4. Device is now unlocked

How to Enter Unlock Codes on LG Incite CT810:


1.Dial this into the LG Incite's phone menu 
2.2945#*810# 
3.Press CALL. 
4.It should you ask you for the code.

How to Enter Unlock Codes on LG Invision CB630:


1.Insert an AT&T or Cingular SIM in the phone; it does not have to be an active SIM 
2.Dial this into the LG Incite's phone menu 
3.*#865625# 
4.Press CALL. 
5.It should you ask you for the code.
 


How to Enter Unlock Codes on all other LG cell phones:



1. Switch ON your phone with an allowed SIM card 
2. Then compose: 

2945#*5101# -  (if you have a LG 510w) 
1945#*5101# -  (if you have a LG 1200 & B1200) 
2945#*5221# -  (if you have a LG 5200 & 52200) 
2945#*5301# -  (if you have a LG 5300) 
2945#*5401# -  (if you have a LG 5400) 
2945#*70001# - (if you have a LG 7020) 
2945#*7101# -  (if you have a LG 7100) 
2945#*1201# or 2945#*70001# - (if you have a LG 1100) 
2945#*70001# -  (if you have a LG7250T) 
2945#*2201# -  (if you have a LG C2200) 
2945#*5301# -  (if you have a LG T5100)
2945#*3311# -  (if you have a LG C3310) 

3. Go to "Menu" and then to "Settings" 
4. Then select "Security" 
5. To finish select "Network Provider" and select "Deactivate" 
6. Enter the unlock code
7. If your cell phone is not listed, please follow instructions for LG C2000 above


How to Enter Unlock Codes on LG KE970 Shine:


1.Switch ON your phone with an allowed SIM card 
2.Then compose: 2945#*9701# 
3.Press CALL. 
4.It should you ask you for the code.
How to Enter Unlock Codes on CU575 / Trax and CU515

1. Put a non cingular sim in the phone ,phone says invalid smart chip

2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code




How to Enter Unlock Codes on CU500

1. Turn on phone with non-accepted SIM card
2. It will say on the screen "invalid smartcard"
3. Enter 159753#*#, it will bring you to the next screen
4. Enter your unlock code and press OK.




Here's how to unlock the EVE GW620R:

Unlock Instruction for LG GW620R
1) Power ON your phone with SIM Card that the phone is locked to
2) Type 2945*#620#UNLOCK CODE 
3) Press OK
4) Device is now unlocked




Here's how to unlock the TU330 

1. Insert an authorized Sim Card and turn ON your phone
2. Enter *#865625#
3. SIM unlock mode will open up
4. Enter Unlock Code
5. Press OK
6. The phone will reboot and the unlock is completed


 

If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked

[sadermo]

!!!!! World First Update !!!!!
- Nokia N9 Security Code Read Added WITHOUT DATA LOSS, WORLD FIRST !!!
- Nokia N9 Phonet connectivity added, WORLD FIRST, you can now safetly read info from your phone like from normal BB5 phones...
- Nokia N9 SX4 Authorization Added, WORLD FIRST
- Nokia N9 Security Repair Added (SX4+PM), WORLD FIRST
- Nokia N9 Read ASK file via FBUS Added, WORLD FIRST
- Nokia N9 PM Read Added, WORLD FIRST
- Nokia N9 PM Write Added, WORLD FIRST
- Nokia N9 Factory Defaults Setting added without flashing, WORLD FIRST
- Nokia N9 Mode Change added (can switch to LoCAL/TEST mode now, WORLD FIRST)
- Nokia N9 Selftests Added, WORLD FIRST
- Nokia N9 Reset FBUS/KEY NCK Counter Reset ADDED, WORLD FIRST
- Nokia N9 Send NCK via FBUS Added, WORLD FIRST
- N9 OMPA3630 Boot Support Added
- Factory BB5 RPL Writing Fixed
- DCT4 BT Flashing Fixed on some BT HW (i.e. 12/11 for 6230i, thx Pulka for reporting)
- Fixed PM Read on some Phones
- Minor Changes and Bugfixes


NOTE :
Just run Cyclone and autoupdate module will update your installation.
Make sure you have latest installer installed.
Firmware update IS NOT NEEDED for this update.

Few tests, Security Code Read w/o data loss :

[Nokia N9 USB Phonet]: Port opened OK!
Security Code 12345
Attempts 00

SX4 Authorization (Make sure FORCE SX4 SERVER is TICKED)

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
SX4 Status: Not authorized (74)
Started mutual authenthication with card...
Cyclone Server (2.0.0.42), Cyclone Box Team 2008-2012 - Ready.
Receiving Phone Seed 1...
Phone Seed 1 Received
Sending calculated Data 1, and expecting Seed 2...
Calculated Data 1 accepted, Phone Seed 2 Received
Sending calculated Data 2
Calculated Data 2 sent, Checking Authorization Status again
Authorization successfully finished!
Looking for Virgin PM In Database...
Virgin PM Not found in local database, obtain one (with fields 1 and 309) and write it using "Write PM" Button
Disconnected from Cyclone Server

And just basic read info...

[Nokia N9 USB Phonet]: Port opened OK!
MCU Version Vp 92_11w21
MCU Date 26-05-11
Product RM-696 (Nokia RM-696)
Manufacturer (c) Nokia
IMEI 357923041454648
Mastercode 555726146
IMEI Spare 3A75290314546404
IMEI SV 3375290314546404F0000000
CNT DFL61_HARMATTAN_10.2011.31-3.343.2.343
PSN CZG234989
Product Code 059L7Z9
Module Code 0204965
Basic Product Code 059G8V7
PSD 0000000000000000
WLAN MAC 04A82A204D8F
Bootcode 2.0.49
Camera 0b:0125:02
APE SW 10.2011.34.1.341.01.2, V 1.2.122, RM-696, (c) NOKIA.
APE Test V 1.2.122
APE HW 1507
APE BT 00060000060d0020
RETU 11
TAHVO 00
AHNE 21
Asic 0
HW Signature
Simlock Server
Simlock Key 2440700000000000
Simlock Profile 0000000000000003
Simlock Aux
Simlock IMEI
Simlock Key Cnt 0
Simlock FBUS Cnt 0
Simlock [1,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [1,2] State: OPENED Type: GID Data: FFFF
Simlock [1,3] State: OPENED Type: GID Data: FFFF
Simlock [1,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [1,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [2,2] State: OPENED Type: GID Data: FFFF
Simlock [2,3] State: OPENED Type: GID Data: FFFF
Simlock [2,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [2,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [3,2] State: OPENED Type: GID Data: FFFF
Simlock [3,3] State: OPENED Type: GID Data: FFFF
Simlock [3,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [3,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [4,2] State: OPENED Type: GID Data: FFFF
Simlock [4,3] State: OPENED Type: GID Data: FFFF
Simlock [4,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [4,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [5,2] State: OPENED Type: GID Data: FFFF
Simlock [5,3] State: OPENED Type: GID Data: FFFF
Simlock [5,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [5,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [6,2] State: OPENED Type: GID Data: FFFF
Simlock [6,3] State: OPENED Type: GID Data: FFFF
Simlock [6,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [6,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,1] State: OPENED Type: MCC-MNC Data: FFFFFF
Simlock [7,2] State: OPENED Type: GID Data: FFFF
Simlock [7,3] State: OPENED Type: GID Data: FFFF
Simlock [7,4] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Simlock [7,5] State: OPENED Type: IMSI Data: FFFFFFFFFFFFFFFF
Auto Selecting Flash Files on User Request...
[Nokia N9 USB Phonet]: Port opened OK!
Product Code: 059L7Z9
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering DCT4 Products - wait...
5 Products left after filtering. Ready.
Scanning avaiable products...
Processing C:\Program Files (x86)\Nokia\Phoenix\Products\...
Processing C:\Users\karwos\Desktop\DP\...
Found 14 products, Filtering BB5 Products - wait...
8 Products left after filtering. Ready.
This is Valid BB5 Product
Retrieving Variants for Product RM-696 - wait...
1 Variants Retrieved
No variant found with given Product Code, selecting first one

Join us on facebook : Cyclone Box | Facebook

Stay tuned,
More to come,
Cyclone Team
Note: Flashing is not supported atm but will be added shortly

[sadermo]

Hi to all, new Installer for Cyclone Box is ready to download.

What's new?

=====================
Installer v1.21
25.06.2012
=====================
- New BB5 FBUs/USB Loaders v12.08.00 Added
- Qualcomm Based Products support added (Lumia 800, 610, etc)
- Normal mode Flashing is supported
- Dead-mode flashing is supported
- Downgrade is supported
- Support for Multi-CNT Qulacomm Configurations
- Support secure-erase USER Area - this takes about 15-25 minutes
- Basic read info including battery information etc for Lumia products
- Automatic Variant selection for Lumia products
- Cross-flash is supported, if Public Key hash matches
- After connecting product in Normal mode, Zune drivers must be installed. Take them from C:\Program Files\Cyclone Box\Drivers\ZuneDrivers
- Flashing drivers will be installed automatically, however on some problems just install them manually from C:\Program Files\Cyclone Box\Drivers\LumiaFlashing
- Abort Button improved
- SX4 Default Database updated, added 30 new models
- Nokia Connectivity cables drivers updated to v7.1.78.0
- Minor changes and bugfixes

more info..................
__________________________________________________ ____
Where from download?
ALWAYS FRESH installer you can get at: http://www.karwos.hk/CycloneBoxInstaller.exe
Uninstalling old version is RECOMMENDED before installing this one, however not ordinary.
You don't need to download Installer MANUALLY. It will be downloaded automatically, if you are having some of last Cyclone build with autoupdate module.

Lumia Flashing drivers will be installed automatically (according to your CPU architecture).
However, ZUNE drivers (when you are attaching phone in Normal mode) need's to be installed Manually from C:\Program files\Cyclonebox\Drivers\ZuneDrivers. This you need to ONLY ONCE.

Firmware upgrade is not needed.

Join us on facebook: Cyclone Box | Facebook

Stay tuned,
Cyclone Team

download mirrors:
http://www.cyclonebox.com/downloads/...xInstaller.exe
http://www.moulnisky.com/downloads/C...xInstaller.exe

[sadermo]

Hi to all,

Cyclone v1.0.1.684
- Added FIRST IN THE WORLD, FREE One-Click Contact Service repair for XGold213 Based Phones. No need to buy RPL! Just click, and in 1 second your CS will go (if CS cause is bad simlock, and reason of this is NCK reset by free softs).
- Memory fragmentation issues fixed during Lumia Flashing
- Cursor problems fixed
- XP Usb support partially fixed
- Minor changes and bugfixes

Supported models:
Asha 200 (RM-761)
Asha 200 (RM-762)
C1-01 (RM-607)
C1-01 (RM-608)
C1-02 (RM-643)
C1-02 (RM-644)
C2-00 (RM-704)
C2-02 (RM-692)
C2-02 (RM-693)
C2-05 (RM-724)
C2-05 (RM-725)
C2-03 (RM-702)
C2-06 (RM-702)
C2-07 (RM-692)
C2-08 (RM-702)
X2-02 (RM-694)
X2-05 (RM-772)

Just run Cyclone, and autoupdate will fetch new version automatically.

Join us on facebook: Cyclone Box | Facebook

Best Regards,
Cyclone Box Team

[sadermo]

Hi, New update for Cyclone Box is ready.

What's new ?

- USB Booting problem solved
- Improved XGold2 Security Repair
- Improved RAPUv1, RAPUv2 USB Booting
- Minor changes and bugfixes

Update will be fetched automatically.
BR,
Cyclone Team