|
Follow @LimsWebForum
|
| Thread Tools |
12-01-2012, 09:07
|
#1 (permalink) |
 
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4 
Country : "
 " |
Cyclone box update here
Cyclone Box Installer v1.16 BLACK EDITION RELEASED
===================== Installer v1.16 Black Edition 21.09.2011 ===================== MAJOR FUNCTIONS ADDED - New BB5 FBUS/USB Loaders v11.24.00 Introduced - Added Dead USB Flashing for RAPIDO and other FUR-over-USB operations (DO NOT USE FOR CERTIFICATE READ/WRITE!), still "old method" avaiable in connection tab. - Certificates operations for Rapido FBUS-OVER-USB disabled, because is not supported by loaders ( it will fail without any attempt ) - Rapido Alive FUR-over-USB flashing not supported, flash those phones by Dead variant instead (Switch to RAW mode problem in this models..), or "Old USB Flashing Method" - "Use OLD USB FLASHING METHOD" moved to BB5/Flashing tab - "Settings" tab renamed to Connection - TX2 settings removed from BB5 Flashing Tab - RAPU Flashing/Booting Improved - C2-02 XGold2 Flashing "Added" - Cyclone has flashing compatibilty for this model, but MassMemory file couldn't be handled becasue too big. Fixed. - BB5 Mass Memory Flashing Tested - Cyclone SW has this posibility from long time ago... - Added "Read Unique Data" button. Use to boot phone by Flashbus directly, and dump Unique Data (for Simlock,SD,...) when phone doesn't have correct BSI resistors value. Dumped unique data might be lately used for USB operations if still FBUS operations fails. - Old DCT4 Asic 2,5,6,7 Direct Unlock/Relock/Autolock Introduced, finally - Standalone DCT4 RPL Calculation Introduced, supported Asics: 2,5,6,7,11 - Added support for DCT4 (7250i, 6610i, 2125i, 2865i, 6275i) Product Data RPL Entity Writing for fixing CS - Added support for generating extended DCT4 RPL with Product Data for above models (CS problems) - Alcatel Calculator added to gui - PMM Protection Checkbox added upon PM write. Use to protect PM security fields. - Diagnostic Module Added - Selftests moved to new "Diagnostic" module - Vibra Tests Added - Backlight Tests Added - "Autodetect" added for DCT4 Unlocking. Unique method - non ASIC dependand (i.e. avoids RM-189 2310 problems avaiable on all boxes right now). If there is problems with autodetection - user still can select unlocking method manually. - Removed DCT4 ASK-RPL From Credits Manager - Removed SuperDCT4 Activation from Credits Manager - StatusBar messages are more accurate now - Added "Auto-Rebuild IMEI" checkbox for "Read UEM IMEI" function. Used to automatically generate FLASH IMEI DATA and programm it - one-click REPAIR ??????????????. - CacheV2 Introduced - XGold1/2 Flashing Routines rewritten to be more memory effective - Dead-erased XGold2 flashing improved, plus added some messages regarding to reviving dead XG2 - USB Connection Type is now selected automatically when XGold2 platform found - The supported MEP List are now acquired from box once Blackberry Tool launch - Moved UEM stuff to new "ASK/RPL Tool" - XGold2 MassMemory flashing added - Remaining XGold Credits are now shown upon launching of Nokia Tool (Those one used for XGold1 LBF, Blackberry Codes Service, etc) - Default Security Area XGold Service count increased from 50 to 100 (100 phones limit between SA updates for Blackerry,XGold1,...) - XGold/Blackberry service is now also checked upon Blackberry tool startup, also after each Code calculation remaining Calculation Limit is displayed - Relock files updated for DCT4 - AutoUpdater Introduced - USB Flashing Solved due to wrongly installed Flashing Cable Drivers on some configurations (i.e. Virgin PC) - Database Unlock Introduced - RPL Write revised - PARTNERC certificate support added for Certificate Read - PARTNERC certificate support added for Certificate Write - PARTNERC certificate support addef for RPL Operations - Erase files support added - DCC configuration for NIMMIIIIRRFF06150000 added - DCC configuration for NIMMIIIIRRFF095A1F05 added - DCC configuration for NIMMIIIIRRFF095A1F04 added - DCC configuration for NI00IIIIRR0306150018 added - DCC configuration for NIMMIIIIRRFF095B1F05 added - DCC configuration for NIMMIIIIRRFF0102F201 added - DCC configuration for ISL2TI0200000103B840 added - DCC configuration for 8600030001040A021001 added - DCC configuration for 860003000104094B2F01 added - DCC configuration for 86000300010401035424 added - DCC configuration for NI00BC000003095B1F00 added - DCC configuration for NI00BC0000030102F203 added - DCC configuration for NI00BC0000030102F202 added - DCC configuration for NI00BC000003095B1F05 added - DCC configuration for NI00BC000003095B1F01 added - DCC configuration for NI00IIIIRR030C213402 added - DCC configuration for NI00IIIIRR030C213401 added - DCC configuration for NI00IIIIRR030C20C605 added - DCC configuration for NI00IIIIRR03094B2F01 added - DCC configuration for NI00IIIIRR0301022E05 added - DCC configuration for NI00IIIIRR0301022E01 added - DCC configuration for NIMMIIIIRRFF0C206C02 added - DCC configuration for NI00IIIIRR0301035602 added - DCC configuration for NI00CS0000040C213402 added - DCC configuration for NI00CS00000401022E05 added - DCC configuration for NI00BC0000040F03F802 added - DCC configuration for NI00BC0000040A4E2000 added - DCC configuration for NI00BC000004095B1F01 added - DCC configuration for NI00BC000004095B1F00 added - DCC configuration for NI00BC0000040103B904 added - DCC configuration for NI00BC0000040102F201 added - DCC configuration for NI00BC00000401022C00 added - DCC configuration for 0A4E2007 added - DCC configuration for 0103B904 added - SX4 Virgin PMs database updated, added RM-256, RM-497, RM-528V, RM-584, RM-586, RM-609, RM-612, RM-626, RM-638, RM-707, RM-712 - HWC/CCC Templates added for products RM-469, RM-540, RM-566, RM-528V, RM-596, RM-609, RM-614, RM-645 - Models.ini refreshed - Skin Stack Updated - Previous updates included - Nokia Connectivity Cable Drivers updated to v7.1.42.0 - Box Firmware v01.73 Released BUG FIXES & IMPROVEMENTS - Afterwards DCT4 Erase All chips, the Permanent Data aren't restored anymore - Fixed DCT4 RPL Write problem when only DATA2 exists in RPL file - Fixed problems with handling RAPIDO > v11.16.00 loaders over FBUS (FUR control Add Problem) - Check flashing Bus for WD2 fixed - Read UEM Imei for WD2 Fixed - Read ASK for WD2 Fixed - Write RPL for WD2 Fixed - Fixed lots of Access Violatios after closing up Nokia Tool - Fixed bug with disappearing Tray icon after Minimize to Tray - Bruteforce between NCK Fixed - PM Write bugs fixed (Access Violation) - Fixed bug with Broadcom Read Info - Fixed spurious XGold2 product to be displayed in XGold1/DCT4 tab - Fixed product mismatch on XG1/XG2 autodetection - Fixed invalid Calculation of Mastercode - 6230 Flashing Fixed (Given Image not maches with readen UPP Id or Image problem). If problem still exists - select all flashing files _MANUALLY_ don't use INI based (because there exists two HW versions E and M - autoselection is HWID based and may fails anytime). - OMAP Loaders Fixed - Fixed some wrong FBUS implementation when Packet size mod 0x78 == 0 Downloads [Content visible to Register user Only] [Content visible to Register user Only] [Content visible to Register user Only] Best Regards, Cyclone Team  |
|
|
|
12-01-2012, 09:10
|
#2 (permalink) | ||||
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Cyclone BOMB!!! RAPUv21 Unlock/SD Repair/RPL Back/Downgrade/
Hi, latest bomb for Cyclone Box is ready
 Update is 100% free and standalone for CycloneBox users;-) - Added FIRST IN THE WORLD, FREE, STANDALONE SL3 UNLOCK by BF FOR LATEST TI BASED NOKIA PRODUCTS (RAPUV2 CPU) this includes Nokia 500, Nokia 600, Nokia 700, Nokia 701 and probably more coming !!!!!! These products are 15 NCK chars so not to worry. - Added FIRST IN THE WORLD, FREE, STANDALONE SUPERDONGLE REPAIR for RAPUv2 Based Phones - Added FIRST IN THE WORLD, FREE, STANDALONE SX4 AUTHORIZATION for RAPUv2 Based Phones - Added FIRST IN THE WORLD, FREE, STANDALONE "FULL RPL" BACKUP (include SUPERDONGLE) for latest RAPUv2 phones - Added FIRST IN THE WORLD, FREE, STANADLONE DOWNGRADE CAPABILITY for latest RAPUv2 phones - Added FIRST IN THE WORLD, FREE, STANDALONE Full Security analysis for RAPUv2 phones - Supported interfaces: USB and FBUS - Small bug fixes, i.e. PM protection is now unticked by default Nokia 701, reading sl3 log file Quote:
Quote:
Quote:
Quote:
At least firmware 1.74 needed (update isn't needed at all). Don't forget to have installed latest v1.16 installer ([Content visible to Register user Only]), so Autoupdate module will do the job. Best Regards, Cyclone Team Last edited by sadermo; 12-01-2012 at 09:12.. |
||||
|
|
|
|
12-01-2012, 09:13
|
#3 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Cyclone Box v1.0.0.11671 Released
Hi, new update is released.
Autoupdate should do the job, in case of any problems (or interrupted update) you can manually download exe from [Content visible to Register user Only] and place in C:\Program Files\Cyclone Box\ Best Regards, Cyclone Team |
|
|
|
| The Following User Says Thank You to sadermo For This Useful Post: |
|
12-01-2012, 09:14
|
#4 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
new update for Cyclone Box is ready.
Hi, new update for Cyclone Box is ready.
Added support for reading Unique Data files for Broadcom 21351 based Nokia Phones (X2, C3, .. and more of them). After read Unique Data you can: - Unlock SP locks by reading LBF data - Backup FULL RPL (including superdonlge) 100% Nokia-Like - Repair corrupted Superdongle keys - Authorize your phone with SX4 emulation inside box - Detailed Security Analysis - Downgrade this phones - More ... PS1: Server connection and 10 credits (with 100 credits threshold) required to perform Broadcom Uni Data dump. PS2: After reading uni data, all operations is standalone (just likely previous basing upon cached data) PS3: Server charged credits, but my phone got disconnected during hash read operation, and hash not readen. What to do, what to do? If your account has been charged, the data generated at server are cached too... That means you can repeat process again (previously charging battery, i.e.), server transaction will be succeeded and no credits charged. Box firmware v01.82 is required to use this update. Software and loaders should be automatically updated. In case if you have aborted your update process, and now having problem with running app - you can download [Content visible to Register user Only] and place it in your Cyclone directory... MORE COMING !!! Best Regards, Cyclone Box Team |
|
|
|
|
05-02-2012, 01:45
|
#5 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Cyclone Bomb, Nokia X1-00 / X1-01 Unlock Added
Hi, new update for Cyclone Box is released.
What's new? - Added support for LBF data read for new XGold110 based phones, this is X1-00, X1-01, absolutly WORLD FIRST - Nokia X1-00, X1-01, 100, 101, 102 flashing added - 20 Digits is now checked upon XGold1xx Hash Read, as users reported 20 digit phones (i.e. new 1616 from Yoigo Spain). The 20 digits phones will not be readed now, to not loss the computation power of SL3 Clusters. - When 20 Digits NCK is found upon BB5 LBF read, operation will be canceled (previously - asked whether to continue, or not), same reason as up - Minor changes and bugfixes How to update? Just run Cyclone, autoupdate will replace Cyclone.exe. Join us on facebook: [Content visible to Register user Only] More to come, Best Regards, Cyclone Box Team |
|
|
|
|
08-02-2012, 23:03
|
#6 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Cyclone BOMB AGAIN, Nokia 100/101/102 Unlock Added!
Hi to all! New BOMB Update for Cyclone Box is ready Again!!
What's new ?? - Added support for unlock by LBF read for latest XGold113 Nokia Phones, this is Nokia 100, 101, 102, again WORLD FIRST - Latest XGold110/113 phones is also supported to full RPL Read (IMEI + Simlock), so afterwards Simlock or IMEI could be fully restored - world's first too... Using RPL method also Keypad/FBUS counter might be resetted. - Added support for Profile Bits analyze upon LBF dump for XGold1xx, so phones which will not accept code via neither keypad or FBUS handler - Log file will not be readen - Minor changes and bugfixes How to update? 1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from [Content visible to Register user Only] and place it at C:\Program Files\Cyclone Box 2. Also Firmware v01.85 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch. Join us on facebook: [Content visible to Register user Only] Best Regards, Cyclone Box Team More to come... |
|
|
|
|
10-02-2012, 00:17
|
#7 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Re: Cyclone box update here
Hi to all! New Update for Cyclone Box is ready Again!!
What's new ?? - Added Fast Standalone Level1-Level7 Codes Calculator from COD Files, supported format is Common Cyclone COD File, oclHashCat Unix/Windows, MXCrap. Not supported format? Send us file. No more server waiting! - SX5 Serial Number injection during Level1-Level7 from COD Calculation is supported. "0" is recommended serials, other may give you - "Wrong code". Use only CHECKED SX5 Serials! - Removed Send COD File To Server, Receive Level7 Code, etc routines. - Minor changes and bugfixes How to update? 1. Run Cyclone Box Software, and autoupdate module will download necessary files. On failure, you can download new exe manually from [Content visible to Register user Only] and place it at C:\Program Files\Cyclone Box 2. Also Firmware v01.86 is Required. Update your box via Box Maintenance, or just agree upon first Nokia Tool launch. Join us on facebook: [Content visible to Register user Only] Best Regards, Cyclone Box Team More to come... |
|
|
|
|
14-02-2012, 20:41
|
#8 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Re: Cyclone box update here
Cyclone Box Free and Standalone XGold213 Unlocking Released
Hi, new update for Cyclone Box is released. Added hash reading for LBF for XGold213 based phones. Operation is free, quick and standalone. And now best, you don't need to know phone CPU platform. Just select USB connection, go to BB5 tab, click good old "Read LBF Data" button, and Cyclone will AUTOMATICALLY detect if this is xgold213, or Texas Instruments based product. Supported models: Asha 200 RM-761 Asha 200 RM-762 C1-01 RM-607 C1-01 RM-608 C1-02 RM-643 C1-02 RM-644 C2-00 RM-704 C2-02 RM-692 C2-02 RM-693 C2-05 RM-724 C2-05 RM-725 C2-03 RM-702 C2-06 RM-702 C2-07 RM-692 C2-08 RM-702 X2-02 RM-694 X2-05 RM-772 Operation log: Release Notes 1. You should have installed latest installer from [Content visible to Register user Only] (this one released at October 2011, most users don't need thus) 2. Autoupdate will work, if not, download new exe manually from [Content visible to Register user Only] 3. If you encountering Autoupdate problems, check firewall. 4. After updating, make sure on bottom-right statusbar you have "No updates avaiable". This updates also downloading XMM2130 loaders from server, so make sure before you start LBF'ing XGold213, you get "No updates avaiable" - this will ensure your 100% success reading LBF data. 5. New firmware v01.88 is required. Update box using Box Maintenance. Please be patient during upgrade progress and don't disconnect your box. We have increased update tries credit numbers from 3 to 5, because of some users problems with update process. Join us on facebook: [Content visible to Register user Only] Best Regards, Cyclone Team |
|
|
|
|
30-03-2012, 15:01
|
#9 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Re: Cyclone box update here
 Cyclone Box Firmware v01.89 Released Hi, new Firmware for Cyclone Box Classic was just uploaded to server. Firmware: Cyclone Nokia/Blackberry Application v01.89, (Mar 29 2012 16:06:54, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2011 Added support for new Blackberry MEPs: MEP-09292-009 MEP-11534-009 Just use Box Maintenance to upgrade your box. You have 5 tries to do that. What else... server was rewritten almost from scratch few days back. That means uptime should be 99.9% right now, we eliminated major overload problems out there. Join us on facebook: [Content visible to Register user Only] Best Regards, More to come, Cyclone Box Team |
|
|
|
|
08-04-2012, 01:25
|
#10 (permalink) |
|
Join Date: Jul 2010
Location: kuto alen alen
Posts: 461
Thanks: 34
Thanked 59 Times in 38 Posts
Rep Power: 4
Country : "
" |
Re: Cyclone box update here
Hi, new Bootloader for Cyclone Box is ready!
What's new? - Built from scratch - More startup stability - Much better smartcard initialization routines - 2x faster (previous boot main fw update - ~20secs, new one ~11secs) - USB 3.0 Compatibility == 4x faster from Initial Bootloader! Upgrade box using new bootloader, usb 3.0 mode USB 2.0 Mode Just upgrade your box using Box Maintenance. Join us on facebook: [Content visible to Register user Only] CYCLONE BOX - POWER ON AND UPGRADE! Stay tuned |
|
|
|
 |
| Thread Tools | |
|
|
